Knowing the Problem In RAM
Sunday, January 22, 2012 by Admin@blogspot
We may have a computer that does not want to work, can not boot for example. If we turn on the computer and then do not enter Windows the first time accompanied by a long beep, then there are issues around memory. Through these tips you will learn about the damage to the Memory / RAM. Knowing the Problem In RAM The sound is the sound that comes out from the internal speakers (speakers from within the casing) when the computer starts up.
Knowing the Problem In RAM
To overcome the memory problem do the following:
- Bios settings should be in a state of default / standard, can cause this problem arises because the bios settings that are too burdensome hardware. To be sure, do clear CMOS by pulling the battery from the motherboard (thin round shape, like a watch battery), after about 3 minutes to replace the battery.
- Check if the memory is installed correctly. Unplug the memory of its socket (where the holder of the memory on the motherboard) and then reinstall
- If not successful, note the gold memory (located at the bottom of memory). Clean the section by using a rubber eraser to remove any dirt or dust that may be attached. If so, replace the memory to the motherboard.
- If the memory is still not willing to work, others plug the memory in our computers, have a friend for example. If it can run normally means that our memory is damaged, but if it still does not walk normally means the problem is the socket on the motherboard. Clean the socket with cotton buds or a vacuum cleaner to clean dust or dirt that may stick. Once completed reinstall the memory.
- If it still does not work, plug socket memory on the other hand, is usually placed next to each other. If it still does not work also means the motherboard that must be serviced / replaced. This is because there are elements / components that create a socket can no longer be used. This often happens on the motherboard that have been aged.
Post a Comment