Increase Computer Speed Performance
Sunday, January 22, 2012 by Admin@blogspot
The number of programs that are installed on the computer, often times we feel becomes increasingly slow computer performance. Or sometimes we are getting slower computer performance. This is due to the increasing duration of use of computers with various programs therein. Computer performance can be influenced by many factors, both software and hardware. Here are some ways that may be made and probably most common is we do or we hear.
Increase Computer Speed Performance
- Uninstall Programs Not Used. Follow the steps below. Click here
- Check the Programs - Programs Automatically Running With Windows
- Defragment hard drive. Follow the steps below Click here
- Replacing Ram in the computer. Follow the steps below Click here
- Turning off unused Service
- Avoid Skin The use of Windows
- Turn off Some Visual Effects Windows
- Additional Limit the Number of Fonts
- Remove Desktop Icon On The Not Important
- Scan Computer From Viruses, Spyware, Trojans and the Like
- Use the More Light Alternative Software
- Using TuneUp Software, Defragment and the Like.
- Hardware upgrades
- Re-install
Before we discuss about the motherboard (mobo) then it is more helpful to read what it is the motherboard?
In this post we will discuss about the damage to the motherboard and its symptoms.
Here overcome
Motherboard dead issue
Check the power supply: In the state of the power cable from the power supply off, disconnect the cable socket mounted on the Mainboard Atx1. Once released, attach the power cord back in, connect / shortkan green wire with black cable, check whether the power supply fan spinning? If the spin is a good power supply. Unplug the cable connections were Atx1 and reattach cables to the motherboard.
Check the Clear CMOS Jumper, whether in position or Free Clear, usually when a new motherboard, the position of the CMOS jumper on the Clear position.
Check the IC chipset plugged in and on the Switch On, whether or not excessive heat, over-heat means the chipset is already damaged. For part of CMOS ICs to date not sold freely.
Motherboard dead issue
Also check whether the switch on its functioning.
Unloading the Motherboard carefully, you try to wear clean thinners, if you can not use thinner bottles are in cans. After you dry clean.
Replace the regulator IC which is located around the ATX power socket on the motherboard.
Replace Elko that seated 1000 s / d 3300 uf / 10 Volt located around the ATX power socket on the motherboard. Be careful to make sure the component loading plug the power cable not connected to the mains.
Post a Comment